Answers, before you ask.

The questions buyers raise most often before a first project — minimum quantities, sampling, timing, confidentiality and compliance. If yours is not here, ask it directly.

Inspection of stainless steel jewelry at the KUBO Jewelry workshop in Guangzhou
Most of the questions on this page are about risk — what happens if a batch fails, who owns the tooling, who carries the cost of a change. Those answers belong in the quote, not in production.
In short

KUBO Jewelry quotes minimum order quantities and lead times per project, because both depend on design complexity, production method, finish and quantity. Sampling typically takes 10–15 days after a specification is approved. Confidential designs are handled under NDA on request, with tooling ownership agreed in writing before development begins.

Can I start with an idea instead of a CAD file?

Yes. A sketch, a reference photograph, a competitor sample or even a written description is enough to begin. We will tell you what additional design work is needed, and confirm the development scope and cost before sampling starts. You do not need to arrive with a finished technical drawing.

What happens after I send a brief?

You get a written reply, usually within one business day. It covers whether the piece is feasible as described, what we would change and why, what tooling is required and how long sampling would take. If a different approach would serve your price point better, we say so at that stage rather than after you have paid a tooling invoice.

What is the minimum order quantity?

MOQ depends on the design, the production method, the finish and the level of customisation — a plain band and a hollow pendant with soldered components are not comparable. Our practical floor is 100 pieces per design: below that, tooling and setup time do not amortise. Tell us your intended quantity per design and we will tell you honestly whether it is feasible and what changes would make it feasible.

How long do sampling and production take?

Sampling typically takes 10–15 days after the specification is approved, and longer where new tooling is required. Bulk production timing is confirmed in writing once the sample is signed off; design complexity, tooling, material availability, finishing and the number of approval rounds all affect the schedule. You receive a dated production calendar rather than a single estimated number.

Can you customise branding?

Yes — logo application by laser engraving, etching, stamping or raised logo. Share your artwork and intended placement at the brief stage; the method, minimum quantity and cost depend on the piece. Custom packaging is not offered: boxes, pouches, printed cards and inserts are specified and sourced by the buyer, and we pack into them on request.

How should confidential designs be shared?

Discuss confidentiality before sending sensitive files. We work under NDA on request, and any tooling ownership, exclusivity and design-use arrangements are agreed in writing as part of the project rather than assumed. We do not resell client designs or reproduce a client's proprietary piece for another buyer.

Which stainless steel grade should I choose — 304 or 316L?

Both are available and both are in regular production here. 316L contains molybdenum, which improves resistance to chlorides and sweat, so it holds up better in daily wear and in humid climates; 304 is the standard grade and costs less. For earrings and pieces worn against the skin, 316L is usually the right call. For charms, components and lower price points, 304 is often sufficient.

What finish options are available?

Mirror polish, brushed or satin, and PVD colour coatings including gold, rose gold, black, gunmetal, champagne and blue. All colour coating is applied by PVD vacuum deposition rather than electroplating, so the colour layer bonds into the steel and resists sweat, tarnishing and wear far longer than a plated surface. Finish combinations — a polished face with a brushed side, for example — are possible and are specified per piece.

Will the colour match between my sample and the bulk order?

That is the purpose of approving a physical sample — the bulk order is produced against it. PVD colour can shift slightly between batches, so a reference sample from the approved run is retained and production is matched to it. If an exact match to an existing product of yours is required, send a physical reference piece rather than a colour code.

Do you provide test reports and compliance documentation?

Not as standard, and it is better you know that before ordering. We are a production factory rather than a laboratory: material grades are confirmed from the mill certificate supplied with the steel, but nickel release, lead and cadmium, or REACH conformity testing is carried out by accredited third-party laboratories on request and quoted as a separate line in the order. Many buyers — particularly in the EU — have their own preferred laboratory and we will prepare and ship samples to it. If your market or your retail partner requires a specific report, name it at the brief stage and it will be arranged before production rather than after, when it is far more expensive to fix.

What are your payment terms?

For a first order, a deposit on order confirmation with the balance against a pre-shipment inspection report. Different terms can be discussed once a payment history exists. FOB, CIF and door-to-door terms are all available depending on your forwarder or your own logistics preference, agreed before production rather than at the port.

Can you produce a small trial order before I commit to a full run?

In most cases yes. A small trial batch is a sensible way to test a new supplier, and we would rather you did that than commit to volume on the strength of a sample alone. Trial quantity is quoted alongside the bulk price so the cost difference is visible before you decide.

Which countries do you export to?

We ship worldwide. The largest share of our clients are in the United States, the United Kingdom, Germany, France, Italy, Spain, the Netherlands, Canada and Australia, with a growing number in the Middle East, Southeast Asia and Latin America. Documentation, communication and compliance workflow are in English throughout. Compliance requirements differ by market — nickel release and GPSR labelling for the EU, state-level packaging rules for the US, SASO for Saudi Arabia — so tell us your destination market at the brief stage and the relevant testing scope will be set out before production.

Do you make finished stock I can resell as-is?

No. KUBO is a custom production partner, not a wholesaler of finished stock, and we do not dropship. Our range photographs show the kind of work we produce, not items held in inventory.

If your question is about a specific design, the fastest route is to send it — a sketch or a photograph is enough to get a real answer rather than a general one.

Compliance and material

B2B buyers increasingly need documentation before they can list a product, and the requirements differ by market. The ones that come up most for European destinations are nickel release (the EU Nickel Directive, Directive 94/27/EC, tested to EN 1811), lead and cadmium content under REACH Annex XVII, and the labelling duty under GPSR (Regulation (EU) 2023/988). UK and US retailers set their own supplier requirements on top of statutory rules, and Gulf markets commonly require SASO conformity.

What we hold and what we do not. We do not maintain an in-house suite of compliance certificates. Material grades are confirmed from the mill certificate supplied with the steel, which we can forward on request. Nickel release, heavy-metal and REACH testing is performed by accredited third-party laboratories — nominated by us or by you — and quoted as a separate line in the order. This distinction matters: a factory that tells you it is "REACH certified" is usually describing a test report on one batch, not a standing certification. Tell us at the brief stage which market and which retail partner you are selling into, and the required test scope will be confirmed before production rather than discovered at customs.

Payment and terms

Standard terms for a first order are a deposit on order confirmation and the balance against a pre-shipment inspection report. Ongoing relationships can be discussed on different terms once a payment history exists. We work with FOB, CIF and door-to-door arrangements depending on what your forwarder or your own logistics preference requires.

Still deciding?
Ask the awkward questions.

Ask about MOQ, tooling cost, or what happens if a batch fails inspection. Straight answers now are cheaper than surprises in production.

Ask a question →